Texture Wall Paint Improve the gloss of the surface layer provide long-term protection for the surface modeling effect and create a matte effect.
Product Introduction
This product is a transparent covering product that matches the main material of artistic paint. It can enhance the matte gloss of the topcoat. At the same time, it has the characteristics of dustproof, scrub resistance, strong adhesion, simple construction, etc., which can well protect the wall decoration effect.
Main ingredients:
High net odor emulsion, environmental protection additives, deionized water, etc.
Product characteristics
1. Matt gloss, protect the surface decoration effect.
2. Dustproof and water-resistant.
3. Stain-resistant and scrub-resistant.
4. Strong adhesion.
5. Healthy and environmentally friendly, with low content of formaldehyde, benzene, VOC, heavy metals, etc.
Product use
Suitable for the covering protection of the main material.
Technical parameters
Theoretical dosage: about 6-8㎡/1KG/1 time depending on the specific process. The actual construction area will vary due to different personal construction methods and processes.
Dilution ratio: 10%-20% of clean water can be used for dilution depending on the specific construction situation.
Drying time: Drying time varies according to the actual construction process.
Maintenance time: 7 days/25℃, low temperature (not lower than 5℃) can be extended to obtain the ideal coating effect.
Implementation standard: GB18582-2020 "Limits of harmful substances in wall coatings for construction".
Product specifications: 5KG/barrel.
Shelf life: See product label.
| Product model |
LNYD006 |
| Product type |
Universal art topcoat (gloss) |
| Main material |
acrylic resin |
| Appearance |
Clear Viscous Liquid |
| State |
No lumps, uniform after stirring |
| Density |
1.4g/ml±0.05% |
| Color |
Clear |
| Gloss |
≥60° |
| Alkali resistance (24 h) |
No abnormality in coating |
| Stability(-5C) |
No degradation |
| Constructability |
No obstacles in applying two coats |
| VOC |
Below the detection limit |
| Formaldehyde content |
Below the detection limit |
| Total content of benzene series |
Below the detection limit |
| Total lead (Pb) content |
Below the detection limit |
| Soluble heavy metal content |
Below the detection limit |
| Solvent type |
Water-based |
| Theoretical coverage |
6-8㎡/1KG/1 times |
| Dilution ratio |
Can be diluted with no more than 10% of clean water |
| Drying time |
Surface drying time ≤2h |
| Maintenance time |
7 days/25℃, extended at low temperatue (not less than 5℃) |
| Implementation standard |
GB18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings" |
Product Tags:
|
|
Matte Effect Wall Paint Texture Provide Long Term Protection For The Surface Modeling Effect Images
|
